Sony StorStation LIB-81 Operating Instructions Manual page 32

Connecting a Network Cable
Accessing the AIT Library From a Browser
19
Select "2. Shutdown", then press
the [ENTER] button.
20
When "[ENTER] to activate"
appears, press the [ENTER] button.
The system performs the shutdown
procedure
21
When the message on the right
appears, turn off the library by
pressing the power switch on the
rear.
When the network settings are done and the library turned off, connect the
network cable.
1
Connect a network cable from the hub to the Ethernet connector on the
library.
2
Turn on the library power.
Use a browser to check whether the library is connected to the network.
1
Launch a browser on a client computer.
2
Enter "http://XXX.XXX.XXX.XXX/" in the "Address" or "Location"
field.
For "XXX.XXX.XXX.XXX", enter the IP address set in the library.
(e.g., 192.168.0.1)
Note
If the IP address assigned by a DHCP server is being used, enter the current
IP address in the "Address" field of the browser. The current IP address can
be checked with [IP Address] of the Network Menu of the control panel.
The top page of the Library Administration Menu appears.
System Down
1.Reset
2.Shutdown
Shutdown
[ENTER] to activate
Shutdown
*** Wait a minute ***
Ready for shutdown
Press the power
switch on the rear
of the Library
Chapter 2 Installation
12:34
32