Connecting Scsi Peripheral Devices; Turning The Power On/Off - Sony StorStation LIB-81 Operating Instructions Manual

Connecting SCSI Peripheral Devices

SCSI Connector 2
SCSI Connector 1

Turning the Power On/Off

Turn the Power On
1
Press the power switch to turn off the power.
2
Use a pointed object such as a machinist's screwdriver to change the
settings of the DIP switches.
3
Press the power switch to turn on the power.
SCSI peripheral devices can be connected to the SCSI connectors of the AIT
library. The SCSI configuration of the library is as shown below. Connect the
devices according to the system environment.
Library
Controller
Notes
• The default factory settings of the SCSI IDs are as follows.
- Library: 0
- AIT Drive: 1
• Do not use repetitive SCSI IDs.
Turn on the AIT library power, then turn on the host computer power.
Library
AIT Drive
Chapter 2 Installation
19