Angle Of Attack (Aoa) - Garmin G3X Touch Pilot's Manual

Flight Instruments
Adding User Timer to Data Bar:
1) From any screen, press the MENU key twice.
2) Touch Setup.
3) Touch Data Bar.
4) Find User Timer Button in the list. Touch
On Left, Show On Right, or Hide.
5) Touch the Timer button on the Data Bar to access the User Timer dialog
box.

ANGLE OF ATTACK (AOA)

For G3X Touch installations that include a GAP 26 and a GSU 25, Angle of Attack
information can be displayed on the PFD. Refer to the G3X Touch Installation Manual
for the Angle of Attack Calibration procedure. During Angle of Attack Calibration Stall
Warning AOA, Caution Alert AOA, Minimum Visible AOA, and Approach Target AOA
(optional) settings are defined.
When AOA exceeds the calibrated Caution Alert threshold (AOA gauge , an
intermittent audible tone will be heard. The tone will increase in frequency until the
Stall Warning AOA, when it will play continuously.
When AOA is below the calibrated Minimum Visible AOA threshold, the angle of
attack gauge is not displayed.
When the GAP 26 and GSU 25 are paired with the GI 260 AOA Indicator, the Angle
of Attack information can also be displayed on the glare shield.
82
User Timer on Data Bar
Garmin G3X Touch Pilot's Guide
to set the User Timer to Show
190-01754-00 Rev. L