Phone & Media Tab - Garmin G3X Touch Pilot's Manual

CNS Interface
3D AUDIO
3D Audio is useful when multiple audio sources are present. 3D audio processing
creates the illusion that each audio source is coming from a unique location or seat
position by using different responses in each ear. Because this feature uses different
signals for left and right channels, it requires wiring for stereo intercom and stereo
headsets. If 3D audio is activated when mono headsets are in use, the listener will still
hear all audio sources; however, there is no benefit from location separation. With a
single COM selected and Radio 3D Audio enabled, the listener hears the audio source
at the 12 o'clock position. If both COMs are selected, the listener hears COM1 at 11
o'clock and COM2 at the 1 o'clock position. When ICS 3D Audio is selected, all intercom
positions are processed to sound like their relative seat location. By default, the GMA
245/245R assumes the pilot sits in the left seat.
Selecting Radio/ICS 3D Audio:
1) Touch More Options button on the Intercom tab.
2) Touch the Radio 3D Audio or ICS 3D Audio button to select/deselect the
desired 3D Audio function.
MUTING
• Radio Mutes ICS –When Radio Mutes ICS is enabled, intercom audio from passengers
to crew is muted when audio from the COM selected for transmission is heard.
• Radio Mutes Music – When Radio Mutes Music is enabled, music audio is muted
when radio audio is heard.
• ICS Mutes Music – When ICS Mutes Music is enabled, music audio is muted when
intercom audio is heard.
PHONE & MEDIA TAB
Selecting the Phone & Media tab:
1) Touch Audio on the CNS Data Bar.
2) Touch the Phone & Media tab (if needed.)
The Phone & Media Tab on the Audio-Intercom Page, provides access to the telephone
controls, enables media playback, and connects to a Bluetooth device.
122
Garmin G3X Touch Pilot's Guide 190-01754-00 Rev. L