Display Setup - Garmin G3X Touch Pilot's Manual

System Overview

DISPLAY SETUP

Accessing Display Setup Options:
1) Press the MENU Key twice.
2) Touch Setup > Display.
Setting Options
Manual
Light Bus
Backlight
Control
Photo Cell
Backlight
Intensity Control
Startup Page
Startup Page
Toggle Split Disable
Screen with
Enable
BACK key
PFD Split
Screen Side
40
Provides configurable manual control
Adjusts backlight according to external
cockpit control, if connected
Uses bezel light sensor to automatically
adjust backlight to complement
ambient light level
Slider Directly sets backlight level if Backlight
Control is set to Manual
List of specific pages to display on
startup. Selecting 'Auto' allows the
Page
GDU to determine which page to
display on startup
Full
Enables or disables Split Screen on
startup
Split
Enables/Disables Split Screen operation
using the BACK key
Left
Specifies the screen side the PFD page
appears on
Right
Display Setup Options
Garmin G3X Touch Pilot's Guide
Description Notes
All GDUs
excluding GDU
45X PFD
All GDUs
excluding GDU
45X MFD and
GDU 470 MFD
GDU 46X PFD
only
190-01754-00 Rev. L