Garmin G3X Touch Pilot's Manual page 266

Hazard Avoidance
D
eDiCateD
NOTE: Traffic alerts and altitude filters can only be changed on the dedicated
Traffic Page (Trf). If the Traffic Page (Trf) is configured off, voice alerts are
enabled and the altitude filter is automatically set to 'Normal'
Displaying/removing the Traffic Page:
1) From the Traffic Page, press the MENU Key.
2) Touch the Traffic Page
3) Touch Show or Hide.
Changing the altitude range:
1) From the Traffic Page, press the MENU Key.
2) Touch Alt Mode.
3) Touch one of the following:
• Above: Displays non-threat and proximity traffic from 9,000 feet
above the aircraft to 2,700 feet below the aircraft. Typically used
during climb phase of flight.
• Normal: Displays non-threat and proximity traffic from 2,700 feet
above the aircraft to 2,700 feet below the aircraft. Typically used
during enroute phase of flight.
• Below: Displays non-threat and proximity traffic from 2,700 feet
above the aircraft to 9,000 feet below the aircraft. Typically used
during descent phase of flight.
• Unrestricted: All traffic is displayed.
246
Traffic (Map Page)
t p (t
raFFiC age rF
.
Garmin G3X Touch Pilot's Guide
Traffic Range
and Altitude
Separation
Traffic
Ground
Track
)
190-01754-00 Rev. L