General Display Information - Garmin G3X Touch Pilot's Manual

System Overview
MAX DISPLAYED FIELD COUNT (GDU 45X OR GDU 46X ONLY)
Used to select the maximum number (1-8) of available data boxes shown on the
Data Bar.
DATA FIELDS
Refer to the Annunciations and Alerts Section for a list of available Data Bar Field
options.
Changing the information shown in the Data Bar fields:
1) Press the MENU Key twice.
2) Touch Setup > Data Bar > Data Fields.
3)
Touch one of the Data Bar fields.
4)
Touch a new data field from the list.
Changing the DME Radio screen side:
1) Press the MENU Key twice.
2) Touch Setup > Data Bar.
3) Touch Left or Right in the 'DME Radio Screen Side' field.
Show/hide the DME Radio tuned frequency:
1) Press the MENU Key twice.
2) Touch Setup > Data Bar.
3) Touch Show or Hide in the 'DME Radio Tuned Frequency' field.

GENERAL DISPLAY INFORMATION

BACKLIGHT SETTINGS
The Backlight Intensity (display brightness) can be set to 'Manual', 'Light Bus', or
'Photo Cell'. With 'Manual' selected, the pilot can manually adjust the desired backlight
intensity. After each power cycle the Backlight Intensity is set to the default, which is
configurable. Refer to the G3X Touch Installation Manual for more information.
38
Garmin G3X Touch Pilot's Guide 190-01754-00 Rev. L