SP Table
2X SP Mode Tables
Basic setting
2
Set the initial value of printing speed, ink detection, and international machine
settings.
Default print speed
Set the initial value of printing speed when you turn on and mode clear.
1: 1st Point(60rpm)
2-1
2: 2nd Point(75rpm)
3: 3rd Point(90rpm)
4: 4th Point(105rpm)
5: 5th Point(130rpm)
Default image position
2-2
Set the initial value of "top-and-bottom position" when you turn on and mode
clear.
Destination code
2-4
Set the Destination code.
Not used
2-5
Image position display
When the user moves the image position on the operation panel, this SP
controls the length of time that the adjustment value is shown on the display
before the screen goes back to the previous display.
2-6
'Slow' means that the display is shown for the longest time possible.
0:SLOW(1.5 seconds)
1:NORMAL (1.0 second)
2:FAST(0.5 second)
2-7 Vendor Selection
C279
[1 to 5 / 3 / 1]
[-15.0 to 15.0 / 0.0 / 0.1 mm]
[0 to 9,- / - / -]
[0 to 2 / 0 / -]
[0 to 2 / 1 / 1]
1
2
[*
/ *
/ Ricoh]
8
SM Appendix