Energy Save; Timer Settings - Ricoh DD 4450 Service Manual

7. ENERGY SAVING

7.1 ENERGY SAVE

7.1.1 ENERGY SAVE
Customers should use energy saver modes properly, to save energy and protect the environment.
The area shaded grey in this diagram represents the amount of energy that is saved when the
timers are at the default settings. If the timers are changed, then the energy saved will be different.
For example, if the timers are all set to 120 min., the grey area will disappear, and no energy is
saved before 120 min. expires.

Timer Settings

The user can set these timers with User Tools (System settings)
Energy saver timer (1 – 120 min): Low Power Mode. Default setting: 1 minute

Auto off timer (1 – 120 min): Off

Default settings:
C279 1min.
The energy saver timer and the auto off timer cannot be used at the same time. Only one

is available.
SM 7-1
Energy Save
C279