Ricoh DD 4450 Service Manual page 228

Brands depend on the destination.
*1 Displays only brand that can be set.
RICOH / TTEC / KMBJ / NRG / Nashuatec /RexRotary / Gestetner / Lanier /
Savin / Standard
*2 If the model code has not been set, if there are multiple brands of a single
model code, "RICOH" has been set.
Ink detection board
Sets whether to detect the ink in the drum.
2-10
ON: Detect the ink.
OFF: The ink is considered always exist.
("OFF" is used in the test or if the ink be removed from the drum..)
Paper end sensor
Set whether to detect the presence of the paper.
2-11
ON: Detect the presence of the paper.
OFF: The paper is considered always exist.(Used in the test)
Drum master sensor
Set whether to detect the presence of the drum master.
2-12
ON: Detect the presence of the drum master.
OFF: The drum master is considered always exist.(Used in the test)
Platen cover sensor
Set whether to detect the presence of the platen cover.
2-13
ON: Detect the presence of the platen cover.
OFF: The platen cover is considered always exist.(Used in the test)
Paper length sensor
Set whether to detect the presence of the paper length sensor on the master
feed unit.
2-15
ON: Detect the presence of the paper length sensor.
Always assumed to be the largest(mm:420mm, inch:432mm).
(Used in the test)
SM Appendix
[ ON-OFF / ON / -]
[ ON-OFF / ON / -]
[ ON-OFF / ON / -]
[ ON-OFF / ON / -]
[ ON-OFF / ON / -]
9
SP Table
C279