Ricoh DD 4450 Service Manual page 236

Drum Master Out&wrap Setting
This function allows users to remove and wrap the master on the drum. The
following keypad operations become available.
2-101
Remove: Press the "Reset key" for more than three seconds
Wrap: Press the "Master Making" key while pressing the "#" key.
Do not leave the drum without a master for more than a day, or the surface of
the drum will become dry.
Set whether to detect the presence of the master feed time.
OFF: Master feed time is invalid
ON: Master feed time is enable.
Reg Improvement for 1st Prt
2-115
Master Compression Time - A3
2-120
Master Compression Time - B4
2-121
Master Compression Time - A$
2-122
5th Speed Paper Limit
This function is used to suppress printing at the 5th speed if the feed direction
length of the paper is less than 170 mm.
2-130
ON: Suppress printing at the 5th speed if the feed direction length of the
paper is less than 170 mm.
OFF: Don't suppress at the 5th speed by the paper size. The accuracy of
the image is degraded.
SM Appendix
[ ON-OFF / OFF / -]
[ ON-OFF / OFF / -]
[ 0-3 / 0 / -]
[ 0-3 / 0 / -]
[ 0-3 / 0 / -]
[ ON-OFF / OFF / -]
17
SP Table
C279