Table of Contents
Advertisement
Tape Dispenser (C651)
2.6.2 INSTALLATION PROCEDURE
1.
Turn off the main switch and unplug the power cord.
2.
Remove the paper delivery plate.
3.
Install the auxiliary bracket [B] on the tape dispenser[A] with M4 x 8 screws (accessories).
4.
Cut off the cover [C] in the rear cover, as shown.
5.
Remove the connecter cover [D].
6.
Remove the screw that is beside the connector [E].
7.
Install the tape dispenser on the main body with two knob screws (accessories) in the two
outer holes in the tape dispenser bracket.
Install the lock washer (accessories) with the lower of the two knob screws.
Tighten the knob screws with a screwdriver to prevent them from coming loose.
8.
Reinstall the paper delivery plate.
C279
2-24
SM
Advertisement
Chapters
Table of Contents
