Audio Effects Menu - Roland VR-1HD Reference Manual

Menu List

AUDIO EFFECTS Menu

Menu item Value
EFFECTS 1–4 (*11) These settings assign functions to the AUDIO EFFECTS [1]–[4] buttons and specify details of their operation.
Specifies the function that is assigned to the AUDIO EFFECTS [1]–[4] button.
NONE
VOICE CHANGER
ASSIGN
PLAYBACK (BGM/SE)
REVERB
MUTE
SOLO
When ASSIGN = VOICE CHANGER
OFF, ON
SW
Specifies the operation of the AUDIO EFFECTS button.
MOMENTARY
SW MODE
LATCH
TARGET MIC 1, MIC 2
PITCH -12– +12
FORMANT -10– +4– +10
OFF, ON
ROBOT
MIX 0–100
RED, GREEN, YELLOW, BLUE,
LED COLOR
MAGENTA, CYAN
When ASSIGN = PLAYBACK (BGM/SE)
SW OFF, ON
Specifies the operation of the AUDIO EFFECTS button.
SW MODE MOMENTARY
LATCH
Selects the music file that will play. Press the [VALUE] knob to see a list of clips.
BriskAfternoon
Applause
AUDIO ASSIGN
USB MEMORY
LEVEL
-INF–10.0dB
LOOP
OFF, ON
FADE IN
OFF, 0.1–10.0sec
FADE OUT
OFF, 0.1–10.0sec
RED, GREEN, YELLOW, BLUE,
LED COLOR
MAGENTA, CYAN
38
Explanation
(bold text: default value)
No function is assigned.
Turns the voice changer on/off.
Effect Transforms the pitch or character of the voice that is input from the mic.
Plays/stops the music file (background music or sound effect).
Turns reverb on/off.
Effect Adds reverberation to the sound.
Turns the mute function on/off for the audio.
Turns the solo function on/off for the input audio.
Turns the voice changer on/off.
You can also turn this on/off using the AUDIO EFFECTS button to which the function is assigned.
The effect is on only while you hold down the button, and turns off when you release the button.
The effect alternately turns on/off each time you press the button.
Specifies the mic audio to which the effect applies.
Adjusts the pitch of the voice in semitone steps. A setting of "0" is the original pitch.
Adjusts the character (formant) of the voice. Settings in the negative (–) direction produce a more
masculine vocal character, and settings in the positive (+) direction produce a more feminine vocal
character. A setting of "0" is the original voice.
If this is "ON, " the voice is held at a fixed pitch, creating a mechanical robot-like impression.
Adjusts the balance between the unprocessed voice (0) and the voice processed by the effect (100).
Specifies the illumination color of the AUDIO EFFECTS button.
Plays/stops the background music or sound effect.
The effect is on only while you hold down the button, and turns off when you release the button.
The effect alternately turns on/off each time you press the button.
Sample clip of background music.
Sample clip of sound effect (applause).
Use a music file saved on the USB flash drive.
Press the [VALUE] knob to view a list of the music files saved in the root directory of the USB flash
drive.
Music files that can be played
Format (extension)
Sample rate
Bit depth
Number of channels
File size
File name
* Music files shorter than 10 ms might not play correctly.
* The VR-1HD plays back the music file directly from the connected USB flash drive. Even if a music
file on the USB flash drive is selected, it will not play unless the USB flash drive is connected.
Adjusts the playback volume of the music file.
Turns loop playback on/off.
Specifies the fade-in time of the music file.
Specifies the fade-out time of the music file.
Specifies the illumination color of the AUDIO EFFECTS button.
WAV (.wav)
44.1, 48 kHz
16 bits
Stereo, mono
2 GB or less
Up to eight single-byte alphanumeric characters
* The extension ".wav" must be added.