Audio Output Menu - Roland VR-1HD Reference Manual

Menu List

AUDIO OUTPUT Menu

Menu item Value
BUS SELECT Specifies the bus that is assigned to each connector.
MAIN, AUX
MONITOR
USB STREAM MAIN, AUX
MAIN, AUX
LINE OUT
PHONES MAIN, AUX
MAIN BUS Adjusts the audio of the MAIN bus.
LEVEL -INF–0
OFF, ON
MUTE
LIMITER OFF, ON
LIMITER THRESHOLD -40.0–
EQ (OFF, ON)
OFF, ON
SW
HI
-15.0–0
HI FREQ
1.00–10
MID -15.0–0
MID FREQ 20.0Hz–500Hz–20.0kHz
MID Q 0.5–1
LO -15.0–0
LO FREQ
20.0–100–500Hz
AUX BUS
Adjusts the audio of the AUX bus.
LEVEL -INF–10.0dB
OFF, ON
MUTE
OFF, ON
LIMITER
LIMITER THRESHOLD -40.0–-6
0 0–500.0ms (*9)
DELAY
(0 0–29.9/25.0frame)
EQ (OFF, ON)
OFF, ON
SW
HI
-15.0–0
HI FREQ
1.00–10
MID
-15.0–0
MID FREQ
20.0Hz–500Hz–20.0kHz
MID Q
0.5–1
LO
-15.0–0
LO FREQ
20.0–100–500Hz
USB STREAM
Adjusts the audio that is output from the USB STREAM port.
LEVEL -INF–10.0dB
MUTE OFF, ON
0 0–500.0ms (*10)
DELAY
(0 0–14.9/29.9/12.0/25.0frame)
(*9) The number of frames shown in parentheses differs depending on the SYSTEM menu's "FRAME RATE" setting.
(*10) The number of frames in parentheses differs depending on the VIDEO OUTPUT menu's "USB FORMAT" setting.
36
(bold text: default value)
0–10.0dB
-6 0–0.0dB
0–15.0dB
0–20.0kHz
0–15.0dB
0–16.0
0–15.0dB
0–0.0dB
0–15.0dB
0–20.0kHz
0–15.0dB
0–16.0
0–15.0dB
Explanation
If you specify "MAIN" (main bus), all input audio is mixed and output. This is the same audio
as the main output.
If you specify "AUX" (AUX bus), only the input audio sent to the AUX bus is mixed and
output. This allows you to output audio that is different than the main output.
What is a bus?
A "bus" is a destination to which input audio is mixed and sent. The VR-1HD has two buses:
the "main bus" and the "AUX bus. " With the exception of the MAIN connector, you can
assign a desired bus to each output connector.
Adjusts the output volume.
Turns the mute function on/off. If this is "ON, " the audio is temporarily silenced.
Turns the limiter on/off.
Compresses the audio so that the mixed audio does not exceed the specified
Effect
threshold level.
* Distortion will occur if audio that exceeds the allowable range of the limiter is input.
Specifies the threshold at which the limiter applies.
Press the [VALUE] knob to access the EQ (equalizer) menu.
Turns the equalizer on/off.
Effect Adjusts the tone quality for each frequency band.
Boosts or attenuates the high band.
Adjusts the center frequency when changing the tone quality in the high band.
Boosts or attenuates the middle band.
Adjusts the center frequency when changing the tone quality in the middle band.
Adjusts the width of the frequency band when boosting or attenuating the middle band.
Boosts or attenuates the low band.
Adjusts the center frequency when changing the tone quality in the low band.
Adjusts the output volume.
Turns the mute function on/off. If this is "ON, " the audio is temporarily silenced.
Turns the limiter on/off.
Compresses the audio so that the mixed audio does not exceed the specified
Effect
threshold level.
* Distortion will occur if audio that exceeds the allowable range of the limiter is input.
Specifies the threshold at which the limiter applies.
Adjusts the delay time of the audio.
Effect Delays the output of the audio by the specified time.
Press the [VALUE] knob to access the EQ (equalizer) menu.
Turns the equalizer on/off.
Effect Adjusts the tone quality for each frequency band.
Boosts or attenuates the high band.
Adjusts the center frequency when changing the tone quality in the high band.
Boosts or attenuates the middle band.
Adjusts the center frequency when changing the tone quality in the middle band.
Adjusts the width of the frequency band when boosting or attenuating the middle band.
Boosts or attenuates the low band.
Adjusts the center frequency when changing the tone quality in the low band.
Adjusts the output volume.
Turns the mute function on/off. If this is "ON, " the audio is temporarily silenced.
Adjusts the delay time of the audio.
Effect Delays the output of the audio by the specified time.