Video Operations; Using Buttons To Switch The Video; Switching The Video Automatically (Auto Switching) - Roland VR-1HD Reference Manual

Video Operations

Using Buttons to Switch the Video

Here's how to manually switch between the INPUT 1–3 video signals.
1
Press an INPUT [1]–[3] button to select the video.
Button Video status
Currently selected input video (the video being
Lit red
output).
Blinking red Currently switching video.
Lit white Valid video is input.
Unlit No video is input.
The selected button blinks red, and the video is gradually switched.
When the video has switched completely, the button changes
from blinking red to lit red.
* When you select scene (p. 12), the input video selection is canceled.
MEMO
5 Video transition time
You can set the video transition time by using [MENU] button
0 "TRANSITION" 0 "TIME. " This setting is common to the
scene (p. 12) transition time.
5 Transition effects
A mix effect is applied when you switch between videos. The
two videos are mixed during the transition.
In the sampling cases, the transition occurs as a cut
(instantaneous switch).
5 If the transition time is set to "0.0sec. "
5 If you press an INPUT/SCENE button while a transition is
occurring
5 Video source
In addition to the video signals that are being input from the
VIDEO INPUT connectors, you can also assign still images or
single-color screens to the INPUT [1]–[3] buttons.
To make these settings, use the [MENU] button 0 "VIDEO
INPUT" 0 "INPUT 1"– "INPUT 3" 0 "INPUT SOURCE. "
Value Explanation
The video being input from the VIDEO
HDMI
INPUT connector
STILL IMAGE 1, 2 A still image loaded into the unit (p. 15)
BLACK, WHITE, GRAY,
Single-color screen
GREEN, BLUE
10
Switching the Video Automatically
(Auto Switching)
The video of INPUT 1–3 or of scenes (p. 12) can be switched
automatically (the auto switching function). You can make operation
easier by letting the video switch automatically.
Operation modes for auto switching
Auto switching provides three operation modes that you can select
as appropriate for your situation: "auto scan, " "beat sync, " and "video
follows audio. "
7 Switching at a specified interval (auto scan)
This automatically switches the video when a specified length of time
elapses. You can change the duration that each video is shown, and
also switch randomly between videos.
This is convenient when you want to switch between video signals
of multiple cameras, for example when live-streaming a singer-
instrumentalist.
* INPUT 1–3 are skipped if there is no video input.
7 Switching in sync with the beat of the music (beat sync)
This detects the beat of the song, and automatically switches the
video at intervals of the beat.
This lets you create video transitions that are synchronized with
the music, for example when live-streaming a DJ performance or a
musical performance.
* For some songs, it might not be possible to correctly detect the beat.
* INPUT 1–3 are skipped if there is no video input.
7 Switching according to the mic volume (video follows audio)
This detects the audio that is input from a mic, and automatically
switches to the specified video according to the volume.
For example, if you're streaming a talk show or a conversation, you
can use this to switch between a closeup of the individual who is
speaking and a wide shot of both people when neither person is
speaking.