Using An Effect Preset - Roland VR-1HD Reference Manual

Reverb (REVERB)
This adds reverberation to the sound.
1
[MENU] button 0 "AUDIO INPUT" 0 "MIC 1"–"PLAYBACK
(BGM/SE)" 0 select "REVERB SEND."
2
Turn the [VALUE] knob to adjust the amount of sound
that is sent to reverb, and then press to confirm.
Adjust the depth of reverb for each audio input.
3
Press the AUDIO EFFECTS [4] button to turn reverb on (lit).
Reverb is applied.
4
To turn reverb off, press the AUDIO EFFECTS [4] button
once again.
Adjusting the reverb depth
1
[MENU] button 0 "AUDIO EFFECTS" 0 "EFFECTS 4"
(ASSIGN=REVERB) 0 select "LEVEL," "TIME," or "TYPE."
Menu item Explanation
Sets the amount of sound that is returned from the
LEVEL reverb (return level). This adjusts the depth of the
overall reverb.
Specifies the time until the reverberation is no longer
TIME
heard.
Specifies the reverb type.
ROOM: Produces the natural-sounding reverberation
TYPE
of a room.
HALL: Produces the reverberation that is typical of a
performance in a concert hall.
2
Turn the [VALUE] knob to edit the value of the setting,
and press to confirm.
3
Press the [MENU] button several times to close the menu.
MEMO
With the factory settings, the AUDIO EFFECTS [4] button is
assigned the reverb on/off function.
You can use the [MENU] button 0 "AUDIO EFFECTS" 0 "EFFECTS 1"
–"EFFECTS 4" 0 "ASSIGN" to change the function that's assigned.

Using an Effect Preset

The VR-1HD provides effect presets for the mics. Simply by selecting
a preset, you can easily apply the effect that's appropriate for your
situation.
Each preset consists of a combination of two effects (equalizer,
high-pass filter).
* When you switch presets, the settings of each effect are
overwritten.
1
[MENU] button 0 "AUDIO INPUT" 0 "MIC 1" or "MIC 2"
0 select "LOAD PRESET."
The preset list appears.
2
Turn the [VALUE] knob to select an effect preset, and
press to confirm.
Value Explanation
DEFAULT Flat settings that do not apply any effect.
WIND NR Reduces wind noise.
VIBRATION NR Reduces vibration and other low-frequency noise.
Reduces noises produced by the lips when
LIP NR
speaking or singing. This is appropriate for vocal
input.
SPEECH Makes a spoken voice easier to understand.
VOCAL Enhances a singing voice.
A confirmation message appears.
If you want to cancel the operation, press the [MENU] button.
3
Turn the [VALUE] knob to select "YES," and press to
confirm.
The preset is loaded. When the operation is finished, the
message "COMPLETED" appears.
4
Press the [VALUE] knob to close the message.
5
Press the [MENU] button several times to close the
menu.
Audio Operations
19