Page 1
VR-120HD is updated to the latest version. ¹ The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Roland is under license. ¹ Roland is an either registered trademark or trademark of Roland Corporation in the United States and/or other countries.
Page 2
* If a dialog box that reads “Bluetooth Pairing Request” appears, tap “Pair”. Turn Bluetooth on in the Settings menu. Tap the box in STEP 3, and tap “Roland VR-120HD * Even if the available device list shows “Roland VR-120HD”, don’t tap it. (Bluetooth)” in the list. Launch the VR-120HD Remote app.
Page 3
This shows you how to use a USB cable to directly connect your iPad to the VR-120HD. Connect the iPad to the USB STREAM port on the iPad VR-120HD. Turn on the iPad and launch VR-120HD Remote. Tap the Connect [Setup] button. USB Type-C port USB Type-C® cable...
Page 4
VR-120HD. and tap “Connect”. * Do not connect to the internet port or WAN port. Launch the VR-120HD Remote app. Turn on the wireless LAN master device and enable DHCP Tap the Connect [Setup] button. server functionality on the wireless LAN master device.