Roland VR-1HD Reference Manual page 13

7
Split
1
[SCENE EDIT] button 0 "SCENE A"–"SCENE E" 0 select
"TYPE."
2
Turn the [VALUE] knob to select "SPLIT," and press to
confirm.
3
Use the [VALUE] knob to select a menu item.
Menu item
PATTERN
B B
A A A A
A A
B B
B B B B
A B
CENTER
A CH (LEFT/UPPER)
B CH (RIGHT/LOWER)
A-CENTER (*1)
B-CENTER (*1)
(*1) This is valid if "PATTERN" is set to "V.CENTER" or "H.CENTER. "
2
Turn the [VALUE] knob to edit the value of the setting,
and press to confirm.
3
Press the [SCENE EDIT] button several times to close the
menu.
MEMO
A still image loaded into the unit (p. 15) cannot be made smaller.
If you use "V.STRETCH" or "H.STRETCH" to show a still image,
the stretch effect might not apply correctly depending on the
resolution of the still image or the display region of the screen.
Shows the type of
screen configuration
that is currently
registered.
Explanation
Specifies the pattern for the split.
V.CENTER: H.CENTER:
A A B B
A A A A
B B B B
A B A B
V.STRETCH: H.STRETCH:
A A B B A A
B B
A A B B
Adjusts the position at which the screen is
divided.
Specifies the video that is shown in the left or
upper side.
Specifies the video that is shown in the right
or lower side.
Adjusts the horizontal/vertical position of the
video that's shown in the left or upper area.
Adjusts the horizontal/vertical position of the
video that's shown in the right or lower area.
Copying a scene
Here's how to copy the settings registered in a scene to another scene.
1
[SCENE EDIT] button 0 select "COPY."
The SCENE COPY menu appears.
2
Use the [VALUE] knob to select a menu item.
Menu item
SOURCE
DESTINATION
3
Turn the [VALUE] knob to select one of "SCENE A" –
"SCENE E," and press to confirm.
A A B B
4
Use the [VALUE] knob to select "COPY."
A A
B B
A confirmation message appears.
A A B B
If you want to cancel the operation, press the [MENU] button.
5
Turn the [VALUE] knob to select "YES," and press to
confirm.
A A
The scene is copied. When the operation is finished, the message
B B
"COMPLETED" appears.
6
Press the [VALUE] knob to close the message.
7
Press the [SCENE EDIT] button several times to close the
menu.
Explanation
Specifies the copy-source scene.
Specifies the copy-destination scene.
A A
A A
B B
B B
Video Operations
13