Motorola System 6300 Service Manual page 33

There are 4 Logical Blocks (of 1024 bytes) per Track,
8 Logical Blocks per Cylinder, 640 Logical Blocks per Disk.
The Floppy is Double density
The Step Rate supplied to the Controller is 0.
Partition 0: start Track=0, size (in Blocks)=640
Loader starts at Block 2 (size=12 Blocks).
Bad Block Table starts at Block 1 (size=l Blocks).
The Bad Block Table contains 0 entries.
Output for Subtest 14
DISK TEST Floppy
(Subtest 14) Toggle Alien Disk mode.
Give # of Cylinders (RETURN = default of 80):
Give # of Tracks per Cylinder (RETURN = default of 2):
Give # of Sectors per Track (RETURN = default of 8):
Cylinders = 80, Tracks = 2, Sectors = 8
Give Pack Name (RETURN = default of Floppy):
Give Density (RETURN = default of 2):
Give Step Rate (RETURN = default of 0):
Give Interlace Factor (Default = 1)
Floppy: Alien mode enabled
Output for Subtest 15
DISK TEST Floppy
(Subtest 15) Floppy Read Track.
Give Required Track Number (Default = 0)
Give Required Density (Default = 2)
68640 words of Track 0 data is at address 33000
Output for Subtest 16
DISK TEST Floppy
(Subtest 16) Write to disk from fast comm port.
Volume Name:
Give start Logical Block (RETURN = default of 0):
Give # of Blocks to transfer (RETURN = default of 640):
DIAG24
Tests and Subtests
2-17