Table of Contents
Advertisement
Output for Subtest 6
DISK TEST Floppy
(Subtest 6) Disk Write function.
Do you want to write to the Floppy disk?^
Volume Name: Floppy
Give Buffer Address in hex (RETURN = default of 0X33000):
Give start Logical Block (RETURN = default of 0):
Gi^e # of Blocks to transfer (RETURN = default of 640):
Buffer Address = 0X33000, Start Block = 0, # Blocks - 640
Output for Subtest 7
DISK TEST Floppy
(Subtest 7) Disk Read function.
Volume Name: Floppy
Give Buffer Address in hex (RETURN = default of 0X33000):
Give start Logical Block (RETURN
Give # of Blocks to transfer (RETURN = default of 640):
Buffer Address = 0X33000, Start Block = 0, # Blocks = 640
Output for Subtest 8
DISK TEST Floppy
(Subtest 8) Spare a sector function.
Volume Name: Floppy
Specify Spare: [l/RETURN]=(Cylinder, Head and Byte)
[2] =Physical Sector
[3] =Logical Block:
Give Cylinder Number:
Give Head Number:
Give Byte Number:
No Bad Block Recovery for Floppy Disk.
Give Cylinder Number
Give Head Number
Give Byte Number
Added Bad Block: Cylinder 70, Track 1, Sector 0.
Used Track 588 as the Alternate.
Another (Default: RETURN = Yes) :n
The Bad Block Table contains 1 entries.
default of 0):
-
:70
:1
:3
Tests and Subtests
2-15
Advertisement
Table of Contents
