Table of Contents
Advertisement
Tests and Subtests
Output for Subtest 3
DISK TEST Floppy
(Subtest 3) Disk Write and Check Read test
Do you want to write to the Floppy disk?^
Volume Name: Floppy
Give Data Pattern in hex (RETURN = default of address):
Give start Logical Block (RETURN = default of 16):
Give # of Blocks to transfer (RETURN = default of 624):
Give Max transfer size in Blocks (RETURN = default of 4):
Give # of Times to Repeat
Data Pattern = 0XFFFFCFC7, Start Block = 1 6 ,
Increment = 4, Repeats = 1
Floppy:Initiating Check Read for pass 0
The Bad Block Table contains 0 entries.
Output for Subtest 4
DISK TEST Floppy
(Subtest 4) Disk Read test.
Volume Name: DIAG24
Give Data Pattern in hex (RETURN = default of address):
Give start Logical Block (RETURN = default of 16):
Give # of Blocks to transfer (RETURN = default of 624):
Give Max transfer size in Blocks (RETURN = default of 4:
Give # of Times to Repeat
Data Pattern = 0XFFFFCFC7, Start Block = 16 # Blocks = 624
Increment = 4, Repeats = 1
Test:8, Subtest:4: Floppy=Check-Read Data Fail:
Start Block = 16, Byte=0, Received E206E, Expected FFFFEFFF
Output for Subtest 5
DISK TEST Floppy
(Subtest 5) RcLndom Seek test.
Volume Name: Floppy
Give Maximum Block # (RETURN = default of 640):
Give # of Times to Repeat (RETURN = default of 100):
Maximum Block = 640, Repeat count = 100
2-14
(RETURN = default of 1):
(RETURN = default of 1):
# Blocks = 624,
Advertisement
Table of Contents
