Table of Contents
Advertisement
Tests and Subtests
Output for Subtest 9
DISK TEST Floppy
(Subtest 9) Force DMA Faults.
Output for Subtest 10
DISK TEST Floppy
(Subtest 10)
Do you want to change the VHB on the Floppy driveijr
Give # of Cylinders (RETURN = default of 80):
Give # of Tracks per Cylinder (RETURN - default of 2):
Give # of Sectors per Track (RETURN = default of 8):
Cylinders = 80, Tracks = 2, Sectors = 8
Give Pack Name (RETURN = default of Floppy):
Give Step Rate (RETURN = default of 0):
Give Size of Partition 0 (RETURN = default
Do you want a Loader (Answer [Y/y] or [N/n]:^
Give start Logical Block (RETURN = default of 2):
Give size in Blocks (Default = 12):
Do you want a Dump Area (Answer [Y/y] or [N/n]:n
Do you want a Down Load File (Answer [Y/y] or [N/n]:n
Do you want a Bootable Program (Answer [Y/y] or [N,/n]:y
Do you want it in the Reserved Area (Answer [Y/'y] or [N/n]:
Give start Logical Block (RETURN = default of 14):
Give size in Blocks (Default = 200):
Give Interlace Factor (Default =1):
The Bad Block Table contains 0 entries.
Output for Subtest 11
DISK TEST Floppy
(Subtest 11) Write VHB and BBT after aborted Test 3.
The Bad Block Table contains 0 entries.
Output for Subtest 12
DISK TEST Floppy
(Subtest 12) Print VHB.
Volume Name:
80 Cylinders. 2 Heads per Cylinder.
There are 8 Physical Sectors (of 512 bytes) per Track.
16 Physical Sectors per Cylinder, 1280 Physical Sectors per Disk
2-16
Initialize VHB and BBT.
Floppy
of 640):
Advertisement
Table of Contents
