4.21.78 show port-security switch
Command:
show port-security switch [ interface ( <port_type> [ <port_type_list> ] ) ]
show
Show running system information
port-security
port-security
switch
Show Port Security status
interface
Search by port
Default:
N/A
Usage Guide:
To display the status of Port Security.
Example:
To display the status of Port Security.
Switch # show port-security switch interface GigabitEthernet 1/1
Users:
L = Limit Control
8 = 802.1X
D = DHCP Snooping
V = Voice VLAN
Interface
-----------------------
GigabitEthernet 1/1
4.21.79 show privilege
Command:
show privilege
show
Show running system information
privilege
Display command privilege
Default:
N/A
Users State
MAC Cnt
-----
-------------
----
No users
-400-
Command Guide of MGSW-28240F
-------
0