Pvlan; Pvlan Isolation - Planet Networking & Communication MGSW-28240F Command Manual

Default:
None (Protected)
Usage Guide:
To configure protected mode of Port-security for specific interface
Example:
To configure protected mode (trap-shutdown) of Port-security for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # port-security violation trap-shutdown

4.2.56.82 pvlan

Command:
pvlan <range_list>
pvlan Private VLAN
<range_list> list of PVLANs. Range is from 1 to number of ports.
Default:
None
Usage Guide:
To create PVLAN ID for specific interface
Example:
To create PVLAN ID (5) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # pvlan 5

4.2.56.83 pvlan isolation

Command:
pvlan isolation
pvlan Private VLAN
isolation Port isolation
Command Guide of MGSW-28240F
-123-