Snmp-Server Contact; Snmp-Server Engine-Id - Planet Networking & Communication MGSW-28240F Command Manual

To configure the Read / Write / Source network Community of SNMP
Example:
To configure the Read / Write / Source network Community (below table) of SNMP
Switch# configure terminal
Switch (config)# snmp-server community v3 public 192.168.0.15 255.255.255.0

4.2.195 snmp-server contact

Command:
snmp-server contact <line255>
snmp-server Set SNMP server's configurations
contact Set the SNMP server's contact string
<line255> contact string
Default:
None
Usage Guide:
To configure the sysContact string of SNMP
Example:
To configure the sysContact string (Server123) of SNMP
Switch# configure terminal
Switch (config)# snmp-server contact Server123

4.2.196 snmp-server engine-id

Command:
snmp-server engine-id local <Engineid : word10-32>
Command Guide of MGSW-28240F
-292-