7Th Step: Upgrading The Im 151-7 Cpu As An I Slave And Commissioning The S7-300 - Siemens SIMATIC ET 200S Manual

Cpu interface module
Hide thumbs Also See for SIMATIC ET 200S:
Table of Contents

Advertisement

2.7
7th step: Upgrading the IM 151-7 CPU as an I slave and
commissioning the S7-300
Se-
Description
quence
1
Remove the connector of the PD cable from the IM 151-7 CPU.
2a
Start the Set PD/PC Interface program as described under step 3, point 4. Change the
configuration of the PD/PC interface as follows:
2b
3
Confirm the settings with OK and close the "Set PD/PC Interface" program.
ET 200S IM 151-7 CPU Interface Module
A5E00058783-04
Getting Started
2-11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Im 151-7

Table of Contents