Parameters - Siemens SIMATIC ET 200S Manual

Functions of the IM 151-7 CPU
8.12

Parameters

Parameterizable features
The properties and responses of the IM 151-7 CPU can be parameterized. You
carry out this parameterization on different tabs in STEP 7.
Which parameters can be set for the IM 151-7 CPU?
The following table contains all the parameter blocks for the IM 151-7 CPU. The
parameters are explained in the STEP 7 online help.
Table 8-17 Parameter blocks, settable parameters and their ranges for the IM 151-7 CPU
Parameter Settable parameters
blocks
Startup Startup at preset configuration not equal to
actual configuration
Startup after power on
Monitoring time for:
S
S
Diagnostics/Clock Report cause of STOP
Synchronization in PLC
S
S
Synchronization to MPI
S
S
Correction factor
Retentivity Number of memory bytes starting with MB 0
Number of S7 timers starting with T 0
Number of S7 counters starting with C 0
Time-of-day OB 10 activation
interrupts
OB 10 execution
Start date for the OB 10
Start time for the OB 10
8-44
"Finished" message by means of modules
(100 ms)
Transfer of the parameters to modules
(100 ms)
Type
Interval
Type
Interval
Range
Yes/no
Warm restart
1 to 650
1 to 10000
Yes/no
None/as master
1 s/10 s/1 min/10 min/1 h/12 h/24 h
None/as master/as slave
1 s/10 s/1 min/10 min/1 h/12 h/24 h
–10000 to +10000
0 to 255
0 to 255
0 to 255
Yes/no
S
None
S
Once
S
Every minute
S
Hourly
S
Daily
S
Weekly
S
Monthly
S
Last day of the month
S
Annually
Year-month-day
Hours:minutes
ET 200S IM 151-7 CPU Interface Module
A5E00058783-04