Siemens SIMATIC ET 200S Manual page 139

DP master interface
The DP master interface on the DP master module is used to connect the
distributed I/O (slaves). Transmission rates of up to 12 Mbaud are possible.
The DP master interface can be configured to be a DP master or to be inactive.
S As a DP master the interface requires a configuration. Slaves can be operated
when the configuration is loaded; PD/OP functions and routing are possible.
S The interface is always inactive when there is not configuration.
Which devices can be connected to which interface?
Table 8-10 Connectable devices
S
PD/PC
S
OP/TP
S
S7-300/400 with MPI
interface
S
S7-200
(only with 19.2 kbaud)
Further information
More detailed information on the individual connections can be found in the
Communication with SIMATIC manual.
ET 200S IM 151-7 CPU Interface Module
A5E00058783-04
MPI
S
DP master
S
Actuators/sensors
S
S7-300/400 with
PROFIBUS-DP interface
S
PD/PC
S
OP/TP
Functions of the IM 151-7 CPU
PROFIBUS-DP DP master interface
S
DP slaves
S
Actuators/sensors
S
S7-300/400 with
PROFIBUS-DP interface
S
PD/PC
S
OP/TP
8-27