System Admin
FortiGate Version 4.0 MR1 Administration Guide
01-410-89802-20090903
http://docs.fortinet.com/
•
Feedback
•
ports for HTTP/HTTPS administrative access and SSL VPN login
•
password policy for administrators and IPsec pre-shared keys
•
the idle timeout setting
•
settings for the language of the web-based manager and the number of lines displayed
in generated reports
•
PIN protection for LCD and control buttons (LCD-equipped models only)
•
SCP capability for users logged in via SSH
•
Wireless controller capability
•
IPv6 support on the web based manager.
To configure settings, go to System > Admin > Settings, enter or select the following and
select OK.
Figure 131: Administrators Settings
Figure 132: Administrators Settings
Web Administration Ports
HTTP
HTTPS
SSLVPN Login Port
Telnet Port
TCP port to be used for administrative HTTP access. The default is
80.
TCP port to be used for administrative HTTPS access. The default is
443.
An alternative HTTPS port number for remote client web browsers to
connect to the FortiGate unit. The default port number is 10443.
TCP port to be used for administrative telnet access. The default is 23.
Settings
287