Fortinet FortiGate Series Administration Manual page 143

Hide thumbs Also See for FortiGate Series:

Table of Contents

System Status

Viewport and viewport control

FortiGate unit object

FortiGate Version 4.0 MR1 Administration Guide

01-410-89802-20090903

http://docs.fortinet.com/

Figure 57: Topology page

Zoom/Edit controls

FortiGate unit object

The viewport displays only a portion of the drawing area. The viewport control, at the

bottom right of the topology page, represents the entire drawing area. The darker

rectangle represents the viewport. Drag the viewport rectangle within the viewport control

to determine which part of the drawing area the viewport displays.

The "+" and "-" buttons in the viewport control have the same function as the Zoom in and

Zoom out controls.

The FortiGate unit is a permanent part of the topology diagram. You can move it, but not

The FortiGate unit object shows the link status of the unit's interfaces. Green indicates the

interface is up. Gray indicates the interface is down. Select the interface to view its IP

address and netmask, if assigned.

Subnet object

Using the topology viewer