Fortinet FortiGate Series Administration Manual page 225

Hide thumbs Also See for FortiGate Series:

Table of Contents

System Wireless

FortiGate Version 4.0 MR1 Administration Guide

01-410-89802-20090903

http://docs.fortinet.com/

Figure 101: Rogue Access Point list

Refresh Interval

Set time between information updates. none means no updates.

Updates displayed information now.

Inactive Access Points Select which inactive access points to show: all, none, those detected

less than one hour ago, or those detected less than one day ago.

A green checkmark indicates an active access point. A grey X indicates

that the access point is inactive.

The wireless service set identifier (SSID) or network name for the

wireless interface.

The MAC address of the Wireless interface.

Signal Strength /Noise The signal strength and noise level.

The wireless radio channel that the access point uses.

The data rate of the access point.

The data and time when the FortiWifi unit first detected the access point.

The data and time when the FortiWifi unit last detected the access point.

Mark as 'Accepted AP' Select the icon to move this entry to the Accepted Access Points list.

Mark as 'Rogue AP'

Select the icon to move this entry to the Rogue Access Points list.

Return item to Unknown Access Points list from Accepted Access Points

list or Rogue Access Points list.

You can also enter information about accepted and rogue APs in the CLI without having to

detect them first. See the system wireless ap-status command in the

Rogue AP detection