Changing Replacement Messages - Fortinet FortiGate Series Administration Manual

Replacement messages

Changing replacement messages

252
Figure 116: Replacement messages list
Name The replacement message category. Select the expand arrow to expand or collapse
the category. Each category contains several replacement messages that are used
by different FortiGate features. The replacement messages are described below.
Description A description of the replacement message.
Edit or view Select to change or view a replacement message.
icon
Reset icon Only appears on the a VDOM replacement message list. Select to revert to the
global version of this replacement message.
Note: FortiOS uses HTTP to send the Authentication Disclaimer page for the user to accept
before the firewall policy is in effect. Therefore, the user must initiate an HTTP traffic first in
order to trigger the Authentication Disclaimer page. Once the Disclaimer is accepted, the
user can send whatever traffic is allowed by the firewall policy.
To change a replacement message list go to System > Config > Replacement Message.
Use the expand arrows to view the replacement message that you want to change. You
can change the content of the replacement message by editing the text and HTML codes
and by working with replacement message tags. For descriptions of the replacement
message tags, see Table 39 on page 262.
FortiGate Version 4.0 MR1 Administration Guide
http://docs.fortinet.com/
System Config
Reset
Edit
01-410-89802-20090903
• Feedback