Samsung DCS-816 Programming Manual page 55

SAMSUNG
DCS-816
MMC: 201
DESCRIPTION:
Used to change the passcode allowing access to MMC 200 Open Customer
Programming from its current value.
NOTE: The passcode is four digits long. Each digit can be 0–9. The current (old)
passcode is required for this MMC.
PROGRAM KEYS
KEYPAD
SPK
ACTION
1.
2.
3.
4.
DEFAULT DATA: Passcode = 1234
RELATED ITEMS: MMC 200 Open Customer Programming
CHANGE CUSTOMER PASSCODE
Used to enter passcodes
Save data and advance to next MMC
Press TRSF 201
Enter new passcode via dial keypad
(maximum four digits)
Verify new passcode via dial keypad
Passcode verified (go to step 4)
OR
Passcode failure
Return to step 2
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
MMC 201 (Pages 1 of 1)
Programming
February, 1999
DISPLAY
CUST. PASSCODE
NEW CODE:_
CUST. PASSCODE
NEW CODE: QQQQ
CUST. PASSCODE
VERIFY : QQQQ
CUST. PASSCODE
VERIFY :SUCCESS
CUST. PASSCODE
VERIFY :FAILURE