Samsung DCS-816 Programming Manual page 19

SAMSUNG
DCS-816
l MMC 501 SYSTEM TIMERS
l MMC 415 TRK ABANDON
l MMC 608 CLIP BLOCK
l
MMC 701 CLASS OF SERVICE
l
MMC 724 NUMBER PLAN
displayed when a call rings at the user's
station.
This MMC has two new timers related to
CLIP. The only timer that may need
adjustment is the CLIP DISPLAY TIME.
This is the length of time that CLIP data
is displayed after the CLIP key is pressed.
This MMC is used by the technician to
determine which trunks will record data in
the Call Abandon list and print with an
Abandon "A" flag on SMDR.
This MMC is used by the technician to
assign CLIP Review blocks to keysets to
allow the user to review CLIP data for
previous calls.
All of the CLIP features have been added
to this MMC to enable the technician to
allow or deny them.
CLIP features have been added to this
MMC to allow a technician to assign an
access code where necessary.
2-13
Programming
February, 1999