Program Station Group Names - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816

3.6 PROGRAM STATION GROUP NAMES

This program is used to assign a name or identification to each station group (501-504).
You may assign a name up to 11 characters long.
PROGRAM KEYS
UP & DOWN
KEYPAD
HOLD
Open customer programming and follow the instructions below.
OPERATION
1. Press TRSF 602
2.
Dial the group number (e.g., 504)
OR press the UP or DOWN key to make a selection
and press the left or right soft key to move the cursor
3. Enter the name using the procedure in Program
Station Names (above)
4. Press the left or right soft key to return to step 2
OR press TRSF to store and exit programming
OR press SPK to store and advance to the next
program
Used to scroll and move cursor.
Used to enter characters.
Press to clear entry.
3 - 5
System Administration and Special Features Guide
[500] SGR NAME
[504] SGR NAME
[504] SGR NAME
SAMSUNG
February, 1999