Samsung DCS-816 Programming Manual page 180

SAMSUNG
DCS-816
MMC: 713
DESCRIPTION:
This program entry, also referred to as Out Dial Rules, gives the system the ability
to add or delete a digit string or single digit, if needed, to complete a call. A good
example is adding a digit "1".
The characters Q and # can also be entered.
OPTION
Number of digits to delete
Insert (before dialling string)
Append (after dialling string)
DIGIT STRING KEY
Insert String + Digit String (delete) + Append String
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 713
Display shows
2. Enter index number (e.g., 005)
OR
Press UP or DOWN keys to make selection and
press RIGHT soft key to move cursor
3. Enter number of digits to delete
OR
Press RIGHT soft key to skip step and move
cursor to next step
4. Enter digits to be inserted (e.g., 10288)
OR
Press RIGHT soft key to skip step or to store
information and advance to next step
LCR MODIFY DIGIT TABLE
MAXIMUM NUMBER OF DIGIT ENTRIES
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
MMC 713 (Page 1 of 2)
Programming
February, 1999
15
14
14
DISPLAY
LCR MODIFY (001)
NOF DEL DGT:00
LCR MODIFY (005)
NOF DEL DIGT:00
LCR MODIFY (005)
I:_
LCR MODIFY (005)
I:10288_