Change User Passcode - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816
MMC: 101
DESCRIPTION:
Allows the system administrator or technician to reset any keyset' s passcode to
its default value of "1234." This MMC cannot display station passcodes; it can
only reset them to default.
Keyset users can set or change their individual passcodes. The passcode is
used to lock or unlock the keyset for toll restriction (call barring) override and to
access the DISA feature.
NOTE: Default passcodes cannot be used for toll restriction override or for DISA
access.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 101
2. Dial keyset number (e.g., 205)
3. Press HOLD to reset passcode
4. Press TRSF to store and exit
DEFAULT DATA: All station passcodes = 1234
RELATED ITEMS: MMC 100 Station Lock

CHANGE USER PASSCODE

Display shows
OR
Use UP or DOWN to scroll through keyset
numbers and press RIGHT soft key to move
the cursor right
OR
Press SPK to store and advance to next MMC
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
MMC 101 (Page 1 of 1)
Programming
February, 1999
DISPLAY
[201] PASSCODE
PASSCODE: QQQQ
[205] PASSCODE
PASSCODE: QQQQ
[205] PASSCODE
PASSCODE : 1234