Samsung DCS-816 Programming Manual page 119

SAMSUNG
DCS-816
MMC: 423
DESCRIPTION:
Allows the system to choose the function of each BRI access. You can set a BRI
access as "TRUNK" to which an ISDN C.O. line is connected, or as "STATION"
to which an ISDN terminal is connected.
NOTE
Any change made in this MMC will take effect only after restarting the BRI card. Use MMC 418 to
restart the card.
For each BRI access, two adjacent ports are assigned. You need only change
the value for one of the two ports; the value for the other port will be changed
automatically.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 423
2. Dial BRI trunk number (e.g. 703)
3. Press UP or DOWN key to make selection
4. Press TRSF to store and exit
DEFAULT DATA: TRUNK
RELATED ITEMS: MMC 418 Card Restart
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Display shows
OR
Press UP or DOWN key to select the port
Press the RIGHT soft key to move the cursor
(TRUNK or STATION) and press RIGHT soft
key
OR
Press SPK to store and advance to next MMC
MMC 419 BRI Option
MMC 424 S0 Mapping
MMC 423 (Page 1 of 1)
Programming
February, 1999
S/T MODE
DISPLAY
[701] S/T MODE
TRUNK
[703] S/T MODE
TRUNK
[703] S/T MODE
STATION