Samsung DCS-816 Programming Manual page 215

SAMSUNG
DCS-816
MMC: 732
DESCRIPTION:
This command gives more flexibility to the system by compiling a digit to Plan
or Destination Translation Table, which performs the translation from dialled
digit(s) into destination parts. Destination parts could be a station number,
station group, REPEAT, Change Greeting Message Code or AA Plan Table.
If you selected REPEAT by pressing button B, dialled digits may be bypassed
without translating.
AA Trans Tables (01 – 12) can have up to 50 entries each (Plan01~02:50,
Plan03~12:25).
DESTINATION :
STATION, STATION GROUP, AA TRANS NO., REPEAT and CHANGE
GREETING MESSAGE CODE . If you press the A button in the DESTINATION
field, you are able to enter AA TRANS NUMBER.
You are, however, not allowed to route a table number to the same number
being programmed.
For example:
AA TRAN TB(02)
01: →_
If you press the A button the LCD will show P:
AA TRAN TB(02)
01: →P_
If you enter the same table index number 02 as the current table.:
AA TRAN TB(02)
01: →P02
you will hear error tone and the LCD will show:
AA TRAN TB(02)
NOT PERMIT
If you press the B button in DESTINATION field you are able to enter REPEAT.
If you press the C button in DESTINATION field you are able to enter CHANGE
GREETING MESSAGE CODE.
AA TRANSLATION TABLE
MMC 732 (Page 1 of 2)
Programming
February, 1999