Help Guide
Linear PCM Recorder
PCM-D10
Adding a track mark
You can add a track mark at a point where you want to divide a file later or you want to locate during playback. You can add a
maximum of 98 track marks to a single file.
While recording is in progress or paused, or while playback is in progress or on standby, press T-MARK at the
1
point you want to add a track mark.
The
(track mark) indicator flashes three times, and a track mark is added.
Note
You cannot add track marks to a protected file. To add track marks to a protected file, remove the protection from the file first, then add
track marks. For instructions on removing protection, see
Hint
To locate a track mark and start playback at the track mark, press
is on standby, wait for the
With the HOME menu on the display window, you can still add a track mark by pressing T-MARK while:
recording is in progress or paused.
playback is in progress or on standby.
With the smartphone app (REC Remote), you can select a track mark to add from 4 types.
Related Topic
Adding track marks automatically
Protecting a
(Track mark) indicator to flash once, and then press
file.
or
while playback is on standby or in progress. While playback
to start playback.
115