Sony PCM-D10 Help Manual page 223

No Devices Have Been Added. Add (Pair) a Device.
There are no Bluetooth connections with registered (paired) audio devices to connect. Register (pair) an audio device.
(See Registering (pairing) an audio device and establishing a Bluetooth
No Connected Devices
There are no Bluetooth connections with audio devices to disconnect.
Operation Failed. Try Again.
The attempt to establish an NFC connection between your linear PCM recorder and the audio device or the smartphone failed.
Try the one-touch operation once again.
(See Establishing a Bluetooth connection with the one-touch operation (NFC connection)
(See Establishing a Bluetooth connection with the one-touch operation (NFC connection)
Connection Already Established with the Selected Device
The Bluetooth connection is already established with the selected Bluetooth audio device.
Cannot Find Any Devices. Check the Other Device and Add It Again.
No Bluetooth audio devices available for device registration (pairing) are found in the search results for Bluetooth audio devices.
Make sure that the other device is ready for device registration (pairing) and try again.
(See Registering (pairing) an audio device and establishing a Bluetooth
Connection Unsuccessful. Try Connecting From the Other Device.
Device registration (pairing) with another device was complete on REC Remote but the connection attempt to the device failed.
Establish a Bluetooth connection from the device.
(See Establishing a Bluetooth connection between the smartphone and the linear PCM
To use this option reconnect to the Bluetooth audio device.
A change that requires re-connection was made to the settings while the linear PCM recorder was connected with a Bluetooth
audio device. To enable the settings, disconnect the Bluetooth connection, and then establish a Bluetooth connection once
again.
4-744-529-11(2) Copyright 2018 Sony Corporation
223
connection.)
(Bluetooth function).)
(REC Remote).)
connection.)
recorder.)