Sony PCM-D10 Help Manual page 62

Help Guide
Linear PCM Recorder
PCM-D10
Recording with the external microphone connected to the XLR/TRS jack(s)
You can connect an external microphone (commercially available) to the XLR/TRS jack(s) on the linear PCM recorder and use it
for recording.
Slide the phantom power switch(es) to [OFF].
1
Connect an external microphone to the XLR/TRS jack(s) on the linear PCM recorder.
2
To record in stereo, connect the microphone to both of the XLR/TRS jacks for the left (L) and right (R) channels. To record
in monaural, connect it to the XLR/TRS jack for the left (L) channel.
Adjust the position of the microphone. For the characteristics of the microphone, refer to the operating instructions supplied
with it.
Slide the INPUT switch to [XLR/TRS].
3
Slide the XLR/TRS INPUT LEVEL switch to [MIC].
4
When the microphone is connected to both of the XLR/TRS jacks for the left (L) and right (R) channels, slide both of the
switches for the left (L) and right (R) channels.
If the connected external microphone supports phantom power, slide the phantom power switch(es) to [ON].
5
Power is supplied to the connected microphone.
62