Sony PCM-D10 Help Manual page 60

Help Guide
Linear PCM Recorder
PCM-D10
Recording with the external microphone connected to the MIC IN/LINE IN jack
You can connect an external microphone (commercially available) to the MIC IN/LINE IN jack on the linear PCM recorder and
use it for recording.
Connect an external microphone (
1
Adjust the position of the microphone. For the characteristics of the microphone, refer to the operating instructions supplied
with it.
Slide the INPUT switch to [MIC/LINE].
2
Slide the MIC/LINE INPUT LEVEL switch to [MIC].
3
The Plug In Power screen is displayed.
When a plug-in power microphone is connected, select [ON] to supply power to the microphone from the linear PCM
recorder. If you select [OFF], the Plug In Power will not work.
Follow steps 3 through 7 in
4
The built-in microphones are automatically disabled and sounds through the external microphones are recorded.
Note
When an external microphone is connected to the MIC IN/LINE IN jack on the linear PCM recorder, the built-in microphones are not used
for recording.
) to the MIC IN/LINE IN jack on the linear PCM recorder.
Recording with the built-in microphones to start recording.
60