Sony PCM-D10 Help Manual page 221

Linear pcm recorder
Hide thumbs Also See for PCM-D10:
Table of Contents

Advertisement

The file you selected is protected or [read-only]. You cannot delete the file. Use your linear PCM recorder to remove the
protection from the file, or use a computer to clear the read-only property.
(See
Protecting a
file.)
Protected Files Not Deleted
The file you selected is protected or [read-only]. Use your linear PCM recorder to remove the protection from the file, or use a
computer to clear the read-only property, and then delete the file once again.
(See
Protecting a
file.)
Some Data Not Deleted
If the selected folder contains sub-folders, the sub-folders and their files will not be deleted.
Unknown Data
This data is not in a file format that is supported by your linear PCM recorder. The linear PCM recorder supports FLAC
(.flac)/LPCM (.wav)/MP3 (.mp3)/WMA (.wma)/AAC-LC (.m4a) files.
(See
Technical
specifications.)
You cannot play back copyright protected files.
The file you selected is corrupted. You cannot play or edit it.
File in Format That Does Not Allow Editing
This data is not in a file format that is supported by your linear PCM recorder. The linear PCM recorder supports
FLAC(.flac)/LPCM(.wav)/MP3 (.mp3)/WMA(.wma)/AAC-LC(.m4a) files.
(See
Technical
specifications.)
Invalid Operation
A file system error was detected in the built-in memory or the SD card. It may have been formatted by a computer. Use your
linear PCM recorder to format the built-in memory or the SD card.
(See
Formatting the memory (Format Built-In Memory/Format SD
The built-in memory has a bad block. You cannot write data on the memory. You need to repair your linear PCM recorder.
The SD card has a bad block. You cannot write data on the card. You need to replace the card with a new one.
The remaining capacity of the built-in memory or the SD card is insufficient. You cannot rename any folder or file. Delete
unnecessary folders or files and repeat the operation once again.
(See
Deleting a
folder.)
(See
Deleting a
file.)
The sequential number of the folder or file name has reached the limit. Delete unnecessary folders or files and repeat the
operation once again.
(See
Deleting a
folder.)
(See
Deleting a
file.)
The file name exceeds the maximum number of characters. You cannot divide the file. Shorten the file name.
There is a track mark immediately before or after the point where you want to divide the file. Selecting [At All Track Marks]
for [Divide] with the OPTION menu does not work.
There is a track mark near the beginning or end of the file. Selecting [At All Track Marks] for [Divide] with the OPTION menu
does not work.
You cannot divide the file at a point near the beginning or end of the file.
There is a file with the same name that has track marks. You cannot move, copy, or divide the file.
New File
The recording file has reached the maximum size limit (4 GB for an LPCM file, and 1 GB for an MP3 file). The file will be divided
automatically and recording will continue as a new file.
Cannot Divide - Exceeds Max Number of Files in Folder
Card).)
221

Advertisement

Table of Contents
loading

Table of Contents