Sony PCM-D10 Help Manual page 73

Help Guide
Linear PCM Recorder
PCM-D10
Adjusting the playback speed – the DPC(Speed Control) function
You can adjust the playback speed in a range from 0.25 times to 3.00 times. Changing the playback speed does not affect the
playback audio. Files will play in natural tones, thanks to digital processing.
While playback is on standby or in progress, press
1
The DPC setting screen is displayed.
Press or to select [ON], then press
2
The speed decreases by 0.05 times (from x 0.25 to x 1.00).
The speed increases by 0.10 times (from x 1.00 to x 3.00).
By default, [OFF] is selected.
Press .
3
Hint
To resume the normal playback speed, select [OFF] in step 2.
You can select the playback speed as follows:
1.00 times - 0.25 times: FLAC files with the sampling frequency at 88.2 kHz or higher
2.00 times - 0.25 times: FLAC files with the sampling frequency below 88.2 kHz, LPCM files with the sampling frequency at 88.2 kHz or
higher
3.00 times - 0.25 times: other than the above
DPC(Speed Control).
or to adjust the playback speed.
4-744-529-11(2) Copyright 2018 Sony Corporation
73