Sony PCM-D10 Help Manual page 37

Press or to select [Next], and then press
4
The Beep screen is displayed.
Press or to select [ON] or [OFF] to turn on or off the beep sound, and then press
5
When the initial settings finish, the completion message and then the HOME menu appear.
Note
The date appears in year/month/date, month/date/year or date/month/year format, depending on the selected date display format (Date
Display Format) on the Settings menu. In addition, the default date display format depends on the country or region of your purchase.
The clock may tell the time either in 12-Hour format with [AM] or [PM] or in the 24-Hour format, depending on the selected clock display
format (Time Display) on the Settings menu. In addition, the default clock display format depends on the country or region of your
purchase.
Depending on the country or region of your purchase, you may not be able to select the language. Even when it is available, the number
of available languages and the default language depend on the country or region.
Hint
If you remove the batteries and insert them back in place after an interval of 2 minutes or more, or if you replace the batteries with new
ones, the Date&Time screen is displayed. This screen shows the date and time that you had last used the linear PCM recorder before you
removed the batteries. Change the date and time to the current ones.
You can change the language setting, the date and time setting, and the beep setting at any time later by selecting [
[Common Settings] from the HOME menu.
When you are finished with the initial settings, placing your linear PCM recorder into the HOLD state displays the current date and time on
the display window.
Related Topic
Selecting the display language (Language)
Setting the clock (Set Date/Time)
Selecting the date display format (Date Display Format)
Selecting the clock display format (Time Display)
Turning the beep sound on or off (Beep)
Display window while the HOME menu is displayed
.
4-744-529-11(2) Copyright 2018 Sony Corporation
37
.
Settings] -