Sony PCM-D10 Help Manual page 89

Help Guide
Linear PCM Recorder
PCM-D10
Establishing a Bluetooth connection with the one-touch operation (NFC connection)
You can register (pair) an NFC-compatible Bluetooth audio device and establish a Bluetooth connection with your linear PCM
recorder by simply putting the recorder onto the device.
NFC (Near Field Communication) is a technology enabling short-range wireless communication.
If the Bluetooth audio device has the NFC switch, turn on the switch.
1
Put the linear PCM recorder onto the Bluetooth audio device.
2
Align the mark on the linear PCM recorder with the
an instruction appears on the display window of the linear PCM recorder.
Follow the on-screen instructions until a Bluetooth is established.
3
Start playback on the linear PCM recorder.
4
Now, you can listen to audio from the Bluetooth audio device.
To turn off the NFC function
The NFC function is turned on by default. To turn off the NFC function, select [
HOME menu.
Note
When a camera tripod (commercially available) is attached to the hole for attaching the tripod on the back of the linear PCM recorder, the
mark on the recorder is hidden by the tripod and it is hard to establish a connection with the one-touch operation. When you intend to
use the tripod, be sure to establish the connection before attaching it.
While a recording process is in progress (recording is in progress or paused or the linear PCM recorder is paused for recording), you
cannot establish a connection with the one-touch operation. Before establishing the connection, make sure that recording is on standby.
Hint
If Bluetooth connection is not established, try the following:
Keep your linear PCM recorder touched on the
around.
Check if the NFC function of your linear PCM recorder is turned on. Select [
make sure that [ON] is selected.
mark on the Bluetooth audio device and keep them touched until
mark on the Bluetooth audio device and slowly move the recorder back and forth and
89
Bluetooth] - [NFC Settings] - [OFF] from the
Bluetooth] - [NFC Settings] from the HOME menu and