Touch Panel Models - Brother DCP-7090 Service Manual

3.2.2 Touch panel models

Upper line
Cannot Detect Put the Drum Unit
Cartridge
Error
Cooling Down Wait for a while
Cover is Open -
Document
Jam
Document
Jam/too Long
Drum !
Failed to
Detect the
Line Type
Ignore Data
Jam 2-sided
Error message
Lower line
back in.
Put the Toner
Cartridge back in.
Put the Toner
Cartridge back in.
-
Remove jammed
paper.
-
Connect the line
cord to LINE socket
on the machine, and
then set line type
from menu.
Press Stop[x].
-
Description
New process sensor could not
detect the new drum unit
correctly.
Toner cartridge is not
recognized by the cartridge
sensor.
The new toner sensor of the
toner cartridge could not detect
a new cartridge properly.
New toner box sensor could not
detect the new toner box
correctly.
The side thermistor detected a
temperature higher than the
specified value.
The front cover sensor detected
that the front cover was open.
The eject sensor detected that
the fuser cover was open.
The ADF cover sensor detected
that the ADF cover was open.
The document scanning
position sensor has not
detected the document passing
even after the document has
been fed for the specified time.
The document scanning
position sensor detected that
the document length was 90 cm
or more during the one-side
scanning.
Electric discharge that may be
caused by dirt on the corona
wire of the drum unit was
detected.
Completed auto-detect as line
cord remained connected to the
external terminal.
Received undecodable PS data.
After the first side is printed in 2-
sided printing mode, the
registration front sensor does
not detect paper pass after a set
period of time.
2-34
Error Refer
codes to:
4F05 2-53
2400 2-51
4F01 2-53
5E00 2-53
6801 2-57
6001 2-54
6004 2-54
A400 2-66
A300 2-65
A200 2-65
6A00 2-58
--- 4.13.3
--- 4.14.1
7800 2-60
Confidential