Brother DCP-7090 Service Manual page 294

LCD
P-Pos Y-Offset
Auto FF
Auto FF Time
FF Suppress
Auto LF
Auto CR
Auto WRAP
Auto Skip
Left Margin
Right Margin
Top Margin
Bottom Margin
Lines
Error Print
Sets the print position offset in the Y (portrait) direction. Valid for
printing from the computer only. When the Y-Offset is set on the
computer, the setting on the computer supersedes the setting on
the LCD.
Sets ON or OFF for AutoFF (automatic form feed). Valid for printing
from the computer only.
Sets the time until timeout after AutoFF is set to ON.
Sets whether to skip blank pages. Valid for printing from the
computer only. On or Off setting of the blank data for copying or
faxing cannot be changed in this setting.
Sets the auto linefeed.
Sets the auto carriage return. Adds CR to the LF code.
Sets the auto CRLF by the print width.
Sets whether to skip at the back end / tip of paper. Adds a blank space.
Sets the column space at the left side.
Set the column space at the right side.
Sets the space at the top.
Sets the space at the bottom.
Sets the number of lines in the PCL.
Sets the Error Print in the event of a BR-Script3 error.
5-22
Detail description
Confidential