Brother DCP-7090 Service Manual page 69

Error message
Initial display
Print Unable Turn the power off
05 and then back on
again.
Print Unable Turn the power off
09 and then back on
again.
Print Unable Turn the power off
0A and then back on
again.
Print Unable Turn the power off
0B and then back on
again.
Print Unable Turn the power off
2E and then back on
again.
Print Unable Turn the power off
3A and then back on
again.
Print Unable Turn the power off
A7 and then back on
again.
Print Unable Turn the power off
A9 and then back on
again.
Print Unable Turn the power off
D1 and then back on
again.
Scroll
Detected the fuser unit
temperature error.
Detected irregular power supply
for more than 100 times.
Detected a fan failure.
An error occurred in the high-
voltage power supply PCB
ASSY while operating.
An error occurred in the high-
voltage power supply PCB
ASSY when the machine was in
the ready state.
Could not communicate with the
cartridge sensor on the machine
side.
A communication error occurred
between the controller and
engine in main PCB.
Color parameter in the ROM
does not match the first side or
second side CIS.
A scanning error occurred while
processing the scanned image.
An error occurred while
initializing the modem.
2-29
Description
Error Refer
codes to:
0501 2-49
0502 2-49
0503 2-49
0504 2-49
0505 2-49
0506 2-49
0508 2-49
050A 2-49
050B 2-49
050C 2-49
0900 2-50
0A02 2-50
0B01 2-51
0B02 2-51
2E00 2-51
3A00 2-51
A700 2-67
A900 2-67
D100 2-70
Confidential